Skip to content
HYPERPCB
Get a quote

— SOLUTIONS

High-Frequency PCB Solutions

HyperPCB supplies high-frequency PCB solutions across Dk 2.17 to 10.2 with in-house PTFE and hydrocarbon-ceramic laminates, hybrid stack-ups and ±7% impedance control for communications, instrumentation and sensing products.

High-Frequency PCB Solutions — representative build

— SPECIFICATIONS

Capability & tolerance chart

High-Frequency PCB Solutions — standard vs advanced.
ParameterStandardAdvanced
Dielectric RangeDk 2.17 – 10.2—
Loss PerformanceLow-Df PTFE and hydrocarbon-ceramic systems—
Impedance Tolerance±10%±7%
ConstructionRF-only, hybrid RF/FR-4, HDI on RF material—
VerificationTDR impedance testing with report—

Pick the dielectric from the requirement, not the catalogue

High Dk shrinks a resonator; low Df protects a link budget; a stable thermal coefficient keeps a filter in band across temperature. These pull in different directions, so we start from the parameter that must not move and work back to a material we can fabricate consistently.

Supply continuity

Material substitution mid-programme is one of the most expensive events in RF production. Fabricating the laminate ourselves removes the third-party allocation risk and keeps the qualification you paid for valid.

— FAQ

Frequently asked questions

High-frequency PTFE, hydrocarbon-ceramic, composite bonding systems and metal-core thermal materials — see the laminates section for Dk and thermal data.

Yes, verified by TDR on coupons from the same panel as your boards.

Yes. Laminate and bonding sheets can be supplied as material, with factory-direct datasheets.

— RELATED

Related solutions

Aerospace & Defense PCB Solutions

HyperPCB manufactures aerospace and defense PCBs with 100% material lot traceability, IPC Class 2/3 workmanship, 100% AOI, 3D X-ray and TDR records, on in-house laminates with no third-party substitution risk.

Learn more

Multilayer PCB Solutions

HyperPCB supplies multilayer PCB solutions from 4 to 48 layers with stack-up engineering, ±7% controlled impedance, 20:1 aspect ratio through holes and 100% AOI on every layer — from first article to repeatable production.

Learn more

RF & Microwave PCB Solutions

HyperPCB builds RF and microwave PCBs for antennas, radar, satellite links and RF front-ends on laminates it fabricates itself — Dk 2.17 to 10.2, impedance held to ±7%, signal integrity verified to 40 GHz.

Learn more
Ready to build?

Ready to build?

Upload your Gerber files for a free DFM review and a quote within 24 hours. Mutual NDA available.

Upload Gerber · 24h QuoteTalk to an engineer